Tannoy Revolution Signature DC4 LCR
Tannoy Revolution Signature DC4 LCR
| |
Recommended Amplifier Power
(Watts RMS) |
20 - 125 |
Continuous Power Handling
(Watts Peak RMS) |
62 |
| Peak Power Handling (Watts) |
250 |
| Sensitivity (2.83 Volts @ 1m) |
87dB |
| Nominal Impedance (Ohms) |
8 |
| Frequency Response (-6dB) |
72Hz - 54kHz |
| Dispersion (Degrees Conical) |
90 |
| DRIVE UNIT |
| Dual Concentric™ High Frequency |
19mm (0.75”) titanium dome
with tulip WaveGuide™ |
| Dual Concentric™ Low Frequency |
100mm (4.00”) treated paper pulp cone with rubber surround. 33mm (1.33”) edge wound voice coil |
| Bass Driver |
100mm (4.00”) treated paper pulp cone with rubber surround. 33mm (1.33”) wound voice coil. |
| CROSSOVER |
| Crossover frequency |
1.5kHz |
| Crossover Type |
Passive low loss 2nd order LF, 1st order HF |
| CONSTRUCTION |
| Enclosure Type |
Rear ported |
| Magnetic Shielding |
Yes |
| Volume |
3.95L (0.139 cu. ft.) |
| Dimensions (excl grille) H x W x D |
152 x 307 x 162mm
(5.98 x 12.08 x 6.38”) |
| Weight |
5.2kg (11.4lbs) |
| Finish |
Light oak and Espresso |
|
