Opus WCU330 Wall Control Unit- White
Opus WCU300 Wall Control Unit- White
The WCU300 is a stylish control keypad designed for the Opus 300 system which can also be used in as a sub-zone keypad within Opus 500 installations. Working on the A-BUS standard, installation is extremely simple with just one Cat5 cable connection needed to the DZM amplifier and then standard speaker cable to the loudspeakers.
Amplification is built into the WCU300 with a pre-amp output is even provided for external amplifiers or a powered sub-woofer if required.
Full control of volume, bass, treble, balance and input change is offered and a concealed IR receiver enables the keypad to be operated by remote.
To suit the needs of each room, the fascia style may be changed by removing the “Easy-clip” faceplate, and replacing it with one of the many styles and finishes commonly available.
WCU300 wall control unit features
Clean and simple keypad interface provides easy control
Full control of volume, bass, treble, balance, fader, input change and all-off
Powered by Cat5 or Cat6 cable from DZM. No external power supply needed
Built-in pre-amp output for connection to external power amps
Direct connection to ceiling or all-mounted speakers
Uses standard “Easy-clip” faceplates (full range of styles and finishes commonly available)
Supplied in white as standard
Stainless steel flush mounted faceplate option
powered from MSH via Cat5 or Cat6 cable
+/- 40dB 9 steps both ways
34 - 40kHz and 54 - 58kHz modulation
84mm x 84mm - fits standard
47mm back-box
|
